11. Radio Features
11.1 Scan
11.1.1 Enable Scan
On the home screen, go to Menu > Scan > Scan On/Off, and then press the OK/Menu key.
Press the preprogrammed Scan key.
The radio scans according to the scan list preset for the current channel. During the scanning, the LCD displays
the LED indicator flashes orange slowly.
When detecting activities on a channel, the radio stays on the channel and the LED indicator glows green. If the radio
stays on Priority Channel 1 or Priority Channel 2, the LCD displays
the LCD displays
.
If you do not want to hear activities on the channel, press the preprogrammed Nuisance Temporary Delete key
to remove the channel from the scan list temporarily.
11.1.2 Set Scan List
The scan list is a list of up to 32 analog and digital channels that the radio scans.
On the home screen, go to Menu > Scan, select the scan list, and then do any of the following:
To view or manage all channels on the current list, select View Record, and then press the OK/Menu key.
To set the list as the default scan list for the current channel, select Set Default, and then press the OK/Menu key.
To add a new channel to the list, select Add CH, and then press the OK/Menu key.
If you do not need to scan, you can delete all channels other than the current channel. If you want to preferentially
hear the activities on a channel, you can select the channel, and then select Set PrioCH-1 or Set PrioCH-2.
11.2 Positioning
Positioning allows you to collect the position information of the radio through satellites.
This feature applies only to radios with GPS, BDS, or GLONASS.
or
. If the radio stays on a non-priority channel,
27
, and