Connection diagram of the air pressure switch to the burner air conduct
Burner air pressure switch
P1
Copper tube connection Ø 6 mm:
- Drill the air duct (with hole from Ø 10 mm);
- Fit sleeve A (Ø 10 mm) and weld it on channel E;
- Assemble in sequence the B-D details on the tube (Ø 6 mm) C appropriately shaped up to the connection on the air pressure switch (P1).
E
Air conduct
Iron sleeve Ø 10 mm
A
Male elbow fitting Ø 6 mm x 10
B
Copper tube Ø 6 mm x 1,5 mt
C
Nut for male elbow fitting Ø 6 mm x 10 mm
D
15
PART II: INSTALLATION