About This Manual - Powermatic Accu-Fence PM3000T Operating Instructions And Parts Manual


Never place your hand behind the blade. If
kickback occurs, your hand will be pulled into
the blade.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious or possibly fatal injury.

2.0 About this manual

This manual is provided by Powermatic covering the safe operation and maintenance procedures for the Accu-
®
Fence table saw fence system. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. Your fence has been designed and
constructed to provide consistent, long-term operation if used in accordance with the instructions set forth in
this document.
This manual is not intended to be an exhaustive guide to table saw operational methods, use of jigs or after-
market accessories, choice of stock, etc. Additional knowledge can be obtained from experienced users or
trade articles. Whatever accepted methods are used, always make personal safety a priority.
If there are questions or comments, please contact your local supplier or Powermatic. Powermatic can also be
reached at our web site: www.powermatic.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!

Use a push stick to keep your hands farther
away from the moving blade. If a kickback
occurs, the push stick will most likely take the
damage that your hand would have received.
4