Operating Tips - Vogt TUBE-ICE 03TB Service Manual

03TA Service Manual
• If the operation of your machine is not controlled by a timer, bin level control or some other
mechanism to automatically start and stop ice production, you should use ONLY the
"Clean/Off/Ice" selector switch to start and stop machine.
By turning the "Clean/Off/Ice" switch "Off", the machine will stop after the next harvest cycle.
• Do not use the "Stop" pushbutton or the machine disconnect for normal shutdown of the
machine.
• Throw the "Disconnect" only in an emergency or for safety when performing certain service or
repairs to the machine. The compressor crankcase heater is de-energized when the disconnect is
thrown.
• The "Start" push button can be used to initiate a harvest cycle. When it is pushed during a freeze
cycle, it will immediately initiate a harvest cycle.
• When the machine is stopped with no power to the control circuit and the "Start" button is
pushed, the machine will begin in a harvest cycle when operation is resumed.
3/31/2014

OPERATING TIPS

5-5
START-UP AND OPERATION