Reset; Router Reset; Description Of Router Reset And Restart - Advantech SmartStart SL305 User Manual

5.9.7 Reset

When the PWR LED starts flashing on the front panel, it is possible to restore the de-
fault configuration of the router by pressing the RST button on the rear panel. After pressing
this button, the default configuration will be restored and the router will reboot (after which the
green LED will be on).
In order to press the RST button it is necessary to use a narrow screwdriver or other small
tool.
Before resetting the router, it is recommend to back up the router configuration settings
(see Configuration manual) because resetting the router will return all configuration set-
tings to their default states.
It is important to distinguish between a router reset and reboot.
Action Router behavior
Reboot Turns off and then turns on the router
Reset Restores the default configuration and
reboots the router
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Figure 23: Router reset
Table 11: Description of router reset and restart
24
SmartStart SL305
Invoking events
Disconnect and reconnect the power,
press the Reboot button in the web
configuration
Press the RST button