Status Indication - Advantech SmartStart SL305 User Manual

5.9.1 Status indication

There are three LED indicators on the front panel to provide router status information. The
ETH port has two additional LEDs that provide information about the port status.
Caption Color
PWR Green
DAT Red
WAN Yellow
ETH Green
ETH Yellow
The status indication of the WAN LED is updated every 10 seconds.
1
Or the difference between neighbouring cells is exactly 3 dBm.
2
Or the difference between neighbouring cells is smaller than 3 dBm.
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
State Description
Blinking Router is ready.
On Starting of the router.
Fast blinking. Updating firmware.
Blinking Communication in progress on the radio channel.
Fades out 1x/5 s Signal strength is good.
Fades out 1x/2 s Signal strength is fair
Fades out 1x/1 s Signal strength is poor
For value ranges of signal strength see Configuration
manual, chapter Mobile WAN Status.
On Selected 100 Mbps.
Off Selected 10 Mbps.
On The network cable is connected.
Blinking Data transmission.
Off The network cable is not connected.
Table 6: Status indication
16
SmartStart SL305
1
.
2
.