Table of Contents
Advertisement
Trouble shooting
en
Maximum operating time
If you do not change the settings on your appliance for
several hours, the appliance will automatically stop
heating. This prevents the appliance from continuing to
heat when you are no longer using it.
When the maximum operating time is reached depends
on the various different settings that have been
configured on the appliance.
Maximum operating time reached
A message will appear on the display.
Touch the # button. You can configure new settings if
required.
To prevent the appliance from switching off when
Tip:
you do not want it to, e.g. with an extremely long
cooking time, you should always set a cooking time.
The appliance will continue heating until the set cooking
time has elapsed.
Replacing the bulb in the top of the cooking
compartment
If the cooking compartment light bulb fails, it must be
replaced. Heat-resistant, 25 watt, 230 V halogen bulbs
are available from the after-sales service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Place a tea towel in the cold cooking compartment
1.
to prevent damage.
Turn the glass cover anti-clockwise to remove it
2.
(figure
).
!
Pull out the bulb – do not turn it (figure
3.
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
26
Screw the glass cover back on.
4.
Depending on the appliance model, the glass cover
may have a sealing ring. If the glass cover has a
sealing ring, put it back in place before screwing the
cover back on.
Remove the tea towel and switch on the circuit
5.
breaker.
).
"
Advertisement
Table of Contents
