Table of Contents
Advertisement
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to your home network,
it will function as an oven with no network connection
and can still be operated via the function selector,
temperature selector and buttons.
Notes
Ensure that you follow the safety instructions in this
■
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
Follow the instructions in the Home Connect
app.~ "Important safety information" on page 4
If the appliance is being operated by means of the
■
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
Setting up
To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Observe the Home Connect documents supplied for
this.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
Automatic registration in the home network
Notes
You require a router that has WPS functionality.
■
You can apply the Home Connect settings when you
■
first start up the appliance or by going to the basic
settings.
Open the basic settings. ~ Page 17
1.
Use the function selector to select "Home Connect".
2.
Touch the " button.
3.
A message will appear on the display.
Touch the " button.
4.
The appliance is ready to connect to the network
automatically.
Press the WPS button on the router.
5.
Wait until "Successfully connected to home network.
Next step: Connect app." appears on the display.
Touch the " button.
6.
The appliance is ready to connect to the app.
Launch the app on your mobile device and follow the
7.
instructions for automatic network login.
The login process is complete once "Connected to the
app" is shown on the display.
If the appliance fails to connect to the app, check
Note:
that the router's wireless connection is stable and that
the signal strength is adequate. Then repeat the
process.
Manual registration in the home network
You can apply the Home Connect settings when
Note:
you first start up the appliance or by going to the basic
settings.
Follow the steps to connect to the network
1.
automatically until the appliance prompts you to
press the WPS button on the router.
Touch the " button.
2.
The appliance is ready to connect to the network
manually.
The SSID and the key to the oven network will
appear on the display.
Use the SSID "Home Connect" and the key "Home
3.
Connect" to log your mobile device into the oven
network.
Open the app, enter the details for your home
4.
network and then confirm them.
Once the appliance has received the details for your
home network, it will attempt to connect to your
home network.
Wait until "Successfully connected to home network.
Next step: Connect app." appears on the display.
Touch the " button.
5.
The appliance is ready to connect to the app.
Launch the app on your mobile device and follow the
6.
instructions for automatic network login.
The login process is complete once "Connected to the
app" is shown on the display.
Remote Start
If you want to start the oven using your mobile device,
you must first activate remote start.
Please note that some operating modes can only
Note:
be started on the oven itself.
Press and hold the " button.
C will appear on the display.Remote start is now
activated.
Remote start is automatically deactivated in the
following situations:
If the oven door is opened 15 minutes after remote
■
start has been activated.
Home Connect
en
19
Advertisement
Table of Contents
