Olivetti PGL2545 Operation Manual page 255

JobFinish Notice (Settings for notification when jobs are finished)
The end of a job is notified using E-mail.
Note To send E-mail on this machine, set the SMTP setting to On. For details, refer to ProtocolSettings (Detailed
settings for the network protocol) on page 4-78.
A mail server must be registered. For the method for setting a server, refer to the Embedded Web Server RX User
Guide.
Function:
01 Quiet Mode
Duplex
02
EcoPrint
03
JobFinish Notice:
* Off
01
Finished only
02
03 Finished + Intrp
Address Entry:
Del. after Print (Delete data after printing setting)
Use this setting to specify whether or not the file data is deleted after printing.
Function:
Quiet Mode
01
Duplex
02
03 EcoPrint
7
Press [OK]. Register the file name and the Function menu
reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select JobFinish Notice.
3
Press [OK]. The JobFinish Notice screen appears.
4
Press  or  to select the condition for notification.
The following settings can be selected.
Off (no notification)
Finished only (notification only when job finishes)
Finished + Intrp
(Notification when job finishes or is interrupted)
5
Press [OK]. The Address Entry screen appears.
ABC
Text
6
Enter the E-Mail address to be notified.
7
Press [OK]. Register the address and the Function menu
reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
Note Up to 128 characters can be entered.
Refer to Character Entry Method on page A-2 for details on
entering characters.
When user login administration is set, the address of the
logged in user is entered.
5-18
Document Box