Olivetti PGL2545 Operation Manual page 160

Use the procedure below.
ProtocolSettings:
Bonjour
01
02 IPSec
NetBEUI
03
IPP:
01 * Off/On
Port Number
02
Available Net.
03
Off/On:
01 Off
* On
02
Port Number (Port Number settings)
Specify the port number.
Note This function appears when "IPP" or "ThinPrint" is selected in Protocol Settings (Detailed
settings for the network protocol) on page 4-25.
Port Number:
(1 - 32767)
Available Net. (Protocol settings of each network)
Set whether to enable this function for each network.
Note This setting is is only displayed when the optional Wireless Network Interface Kit is installed.
1
2
Exit
3
4
5
6
7
8
1
2
12345
3
4
1
In the Network menu, press  or  to select ProtocolSettings.
Press [OK]. The ProtocolSettings menu screen appears.
Press  or  to select the item for which you want to make settings.
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when IPP is selected.
Press  or  to select Off/On.
Press [OK]. The Off/On screen appears.
Press  or  to select On or Off.
Press [OK]. The IPP menu screen reappears.
Press  or  key in the menu screen of the selected item, and select
the Port Number.
Press [OK]. The Port Number screen appears.
Use the numeric keys or press  or  to set the Port Number.
Press [OK]. The Port Number is set and the menu screen of the
selected item reappears.
Press  or  key in the menu screen of the selected item, and select
the Available Net.
4-79
Operation Panel