Olivetti PGL2545 Operation Manual page 132

Selecting Regular or Dark Courier/Letter Gothic
Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the procedure below, it is assumed that
Courier is selected. The procedure is the same for Letter Gothic.
Font:
01 Font Type
02 Font ID
Courier
03
Courier:
01 * Regular
Dark
02
Changing the Default Font Size
You can change the size of the default font. If you selected a proportional font, the character size can be changed.
Font:
01 Font Type
02 Font ID
Courier
03
Size:
(4.00 – 999.75)
10
1
2
Exit
3
4
5
6
1
2
Exit
3
4
12.00 point
5
The letter before the number indicates the location of the font, as
shown below.
I: Internal font
S: Soft (downloaded) font
M: Fonts in optional SD card
H: Fonts in RAM disk or optional SSD
Press [OK]. The default font is set and the Font menu reappears.
In the Print Settings menu, press  or  to select Font.
Press [OK]. The Font menu screen appears.
Press  or  to select Courier. If you are selecting the thickness
of the Letter Gothic font, choose Letter Gothic here instead.
Press [OK]. The Courier screen appears.
Press  or  to select Regular or Dark.
Press [OK]. The font thickness is set and the Font menu reappears.
In the Print Settings menu, press  or  to select Font.
Press [OK]. The Font menu screen appears.
Press  or  to select Size.
Press [OK]. The Size entry screen appears.
Press  or  to enter the font size.
Note The font size can be set between 4.00 and 999.75
points, in 0.25-point increments.
4-51
Operation Panel