Olivetti PGL2545 Operation Manual page 212

User Login
This enables user login administration. This switches the User Login Administration On/Off and sets the authentication
network server.
User Login:
01 Login Type
Login Type (Enabling of User Login Administration)
Select Netwk Authentic. to enable User Login Administration.
User Login:
01 Login Type
Login Type:
* Off
01
Netwk Authentic.
02
Netwk Auth. Set (Netwk authentication
Set the network authentication server.
Note These settings are only displayed when Netwk Authentic. has been set as the Login Type (Enabling of
User Login Administration) on page 4-131.
Netwk Auth. Set.:
Server Type
01
02 Host Name
03 Port
1
In the User Login Set. menu, press  or  to select User
Login.
2
Press [OK]. The User Login menu screen appears.
Exit
1
In the User Login menu, press  or  to select Login Type.
2
Press [OK]. The Login Type screen appears.
Exit
3
Press  or  to select Netwk Authentic. or Off.
4
Press [OK]. The User Login menu reappears.
setting
)
1
In the User Login menu, press  or  to select Netwk Auth.
Set.
2
Press [OK]. The Netwk Auth. Set menu screen appears.
Exit
The options available in Netwk Auth. Set are as follows:
• Server Type (Server type selection)...4-132
• Host Name (Entering of Host Name)...4-132
• Port (Port number setting)...4-132
• Domain Name (Selecting of Domain Name)...4-133
4-131
Note When Netwk Authentic. is selected, set the
network authentication server.
Operation Panel