D-Link DIR-825+ User Manual page 51

Section 3 - Configuration
Secondary DNS Enter the secondary DNS server IP addresses.
Server :
MTU Size: Enter the MTU size.
MAC Address: If your Internet connection is tied to a specific PC or hardware, enter
it manually or click Clone Your PC's MAC Address.
If your ISP requires the use of 80211Q VLAN tagging, see VLAN on page 49.
PPPOE INTERNET CONNECTION TYPE :
Select either Dynamic IP or Static IP
Address Mode:
If you choose Static IP as the Address Mode, enter your IP address:
IP Address: Enter the IP address provided by ISP.
When you have finished configuring your Internet connection, click the Save Settings
button.
D-Link DIR-825+ User Manual
RUSSIA PPPoE (Username / Password) (Continued)
VLAN :
DIR-825+
INTERNET WAN
WAN
Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE,
PPTP, L2TP, DS-Lite and Russia PPPOE. If you are unsure of your connection method, please contact your Internet Service Provider.
Note : If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.
Save Settings Don't Save Settings
INTERNET CONNECTION TYPE
Choose the mode to be used by the router to connect to the Internet.
My Internet Connection is : RUSSIA PPPoE (Username / Password)
PPPOE INTERNET CONNECTION TYPE :
Enter the information provided by your Internet Service Provider (ISP).
Address Mode : ž Dynamic IP š Static IP
IP Address :
User Name :
Password :
Verify Password :
Service Name :
Reconnect Mode : ž AlwaysOn
š On Demand š Manual
Maximum Idle Time :
DNS Mode : ž Receive DNS from ISP š Enter DNS Manually
Primary DNS Server :
Secondary DNS Server :
MTU : 1452
MAC Address :
Clone Your PC's MAC Address
VLAN
WAN PHYSICAL SETTINGS :
Address Mode : ž Dynamic IP š Static IP
IP Address :
Subnet Mask :
Save Settings Don't Save Settings
SETUP
▼
(optional)
▼ New Schedule
(minutes)
(optional)
47