Router Mode - D-Link DIR-825+ User Manual

Section 3 - Configuration
This section will show you how to configure or change the default settings your D-Link
DIR-825+ using the web-based configuration utility in Router Mode. Router mode is the
default setting. To change modes, see Device Mode on page 87.
To access the configuration utility, open a web browser such as Internet Explorer and enter
http://dlinkrouter.local./ or you may also connect by typing the IP address of the router
(by default this is http://192.168.0.1) in the address bar.
Enter your password. If you previously followed the setup wizard, please use the
admin password you entered during the wizard. Otherwise, leave the password blank.
Click Login to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button on the
back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the configuration utility,
try clearing your browser cache or try using your web browser's private browsing mode.
DIR-825+
INTERNET CONNECTION
INTERNET
If you are configuring the device for the first time, we recommend that you click on the Internet Connection Setup Wizard, and follow
WIRELESS SETTINGS
the instructions on the screen. If you wish to modify or configure the device settings manually, click the Manual Internet Connection
Setup.
NETWORK SETTINGS
INTERNET CONNECTION SETUP WIZARD
STORAGE
If you would like to utilize our easy to use Web-based Wizard to assist you in connecting your new D-Link Systems Router to the
Internet, click on the button below.
IPV6
DEVICE MODE
Note:Before launching the wizard, please make sure you have followed all steps outlined in the Quick Installation Guide included in the
package.
MANUAL INTERNET CONNECTION OPTION
D-Link DIR-825+ User Manual
If you would like to configure the Internet settings of your new D-Link Router manually, then click on the button below.

Router Mode

SETUP ADVANCED
Internet Connection Setup Wizard
LOGIN
Login to the router :
User Name :
TOOLS STATUS
Admin
Password : Login
SUPPORT
25