Manual Ipv6 Internet Connection Setup - D-Link DIR-825+ User Manual

Section 3 - Configuration
Click the Manual IPv6 Internet Connection Setup button to manually configure your IPv6
connection to your ISP. When you are satisfied with your configuration, click Save Settings.
IPV6 INTERNET CONNECTION SETUP WIZARD
My IPv6 Choose your IPv6 connection type from the drop-down menu. You will
be presented with the appropriate options for your connection type.
Connection is:
For Static IPv6 refer to page 72.
For Autoconfiguration(SLAAC/DHCPv6) refer to page 74.
For PPPoE refer to page 76.
For IPv6 in an IPv4 Tunnel refer to page 79.
For 6to4 refer to page 82.
For 6rd refer to page 84.
For Local Connectivity Only refer to page 86.
When you have finished configuring your IPv6 connection, click the Save Settings button.
D-Link DIR-825+ User Manual

Manual IPv6 Internet Connection Setup

DIR-825+
IPV6 IPV6
IPV6
Use this section to configure your IPv6 Connection Type.If you are unsure of your connection method, please contact your Internet
Service Provider.
Save Settings Don't Save Settings
IPV6 CONNECTION TYPE
Choose the mode to be used by the router to connect to the IPv6 Internet.
My IPv6 Connection is: Static IPv6
Autoconfiguration(SLAAC/DHCPv6)
PPPoE
IPv6 in IPv4 Tunnel
6to4
6rd
Local Connectivity Only
SETUP
▼
71