Table of Contents
Advertisement
Section 3 - Configuration
Click Admin on the navigation menu to configure the administration settings. This page
allows you to configure access to the web configuration utility. When you are satisfied with
your configuration, click Save Settings.
Password:
Enter the new password for the admin account.
Verify Password:
Enter the new password for the admin account one more time.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. You may
Server::
access the web configuration utility using https://dlinkrouter.local./.
Enable Remote
Remote management allows the DIR-825+ to be configured from the
Management:
Internet by a web browser. A password is still required to access the
web management interface.
Remote Admin
Enter the port number you wish to use to access the DIR-825+'s web
Port:
configuration utility. Example: http://x.x.x.x:8080 where x.x.x.x is
the Internet IP address of the DIR-825+ and 8080 is the port used for
the web management interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
and securely, you may enter https:// at the beginning of the address.
Remote Admin
You may select an inbound filter from the drop down menu to restrict
Inbound Filter:
remote administration. Refer to Inbound Filter on page 95 for
more information.
Details:
The current status of the Remote Administration Inbound filter is
displayed here.
Click the Save Settings button when you are finished.
D-Link DIR-825+ User Manual
ADMIN PASSWORD
ADMINISTRATION
Admin
DIR-825+
ADMIN
ADMINISTRATOR SETTINGS
The 'admin' account can access the management interface. The admin has read/write access and can change password.
By default there is no password configured. It is highly recommended that you create a password to keep your router secure.
ADMIN PASSWORD
Please enter the same password into both boxes, for confirmation.
ADMINISTRATION
ADMINISTRATOR SETTINGS
Save Settings
Don't Save Settings
Password :
Verify Password :
☐
Enable HTTPS Server :
☐
Enable Remote Management :
Remote Admin Port :
8080
Use HTTPS:
Remote Admin
Inbound Filter
:
Allow All
▼
Details :
Allow All
Save Settings
Don't Save Settings
TOOLS
☐
112
Advertisement
Table of Contents
