D-Link DIR-825+ User Manual page 47

Section 3 - Configuration
Maximum Idle Set the length of time to wait before disconnecting if there is no
Time: Internet activity. (Manual Only.)
Primary DNS Enter the primary DNS server IP addresses.
Server:
Secondary DNS
Enter the secondary DNS server IP addresses.
Server :
MTU Size:
Enter the MTU size.
MAC Address:
If your Internet connection is tied to a specific PC or hardware, enter
it manually or click Clone Your PC's MAC Address.
If your ISP requires the use of 80211Q VLAN tagging, see VLAN on page 49.
When you have finished configuring your Internet connection, click the Save Settings
button.
D-Link DIR-825+ User Manual
PPTP (Username / Password) (Continued)
VLAN :
DIR-825+
INTERNET WAN
WAN
Use this section to configure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE,
PPTP, L2TP, DS-Lite and Russia PPPOE. If you are unsure of your connection method, please contact your Internet Service Provider.
Note : If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.
Save Settings Don't Save Settings
INTERNET CONNECTION TYPE
Choose the mode to be used by the router to connect to the Internet.
My Internet Connection is : PPTP (Username / Password)
PPTP INTERNET CONNECTION TYPE :
Enter the information provided by your Internet Service Provider (ISP).
Address Mode : ž Dynamic IP š Static IP
PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address :
Username :
Password :
Verify Password :
Reconnect Mode : ž AlwaysOn
š On Demand š Manual
Maximum Idle Time :
Primary DNS Server :
Secondary DNS Server :
MTU : 1400
MAC Address :
Clone Your PC's MAC Address
VLAN
Save Settings Don't Save Settings
SETUP
▼
▼ New Schedule
(minutes)
(optional)
43