Connect A Wireless Client To Your Router; Wps Button - D-Link DSL-245GE User Manual

Section 6 - Connecting to a Wireless Network

Connect a Wireless Client to Your Router

The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such
as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras have a WPS button (or a software utility
with WPS) that you can press to connect to the DSL-245GE. Please refer to your user manual for the wireless device you want to
connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DSL-245GE for about 5 seconds. The WPS LED on the front panel will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the WPS LED stops blinking, you will be connected
using WPA2 encryption.
D-Link DSL-245GE User Manual

WPS Button

WPS Button
95