Table of Contents
Advertisement
Section 2 - Installation
If you chose Username / Password Connection (PPPoE) as your Internet Connection, configure the following settings:
SET USERNAME AND PASSWORD CONNECTION (PPPOE)
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Click Next and proceed to Step 2 - Configure Your Wi-Fi Security on page 23.
If you choose Username / Password Connection (PPTP) as your Internet Connection, enter your IP address, configure the following settings:
SET USERNAME AND PASSWORD CONNECTION (PPTP)
Address Mode:
Select either Dynamic IP or Static IP
If you choose Static IP as the Address Mode, enter your IP address:
PPTP IP Address:
Enter the PPTP IP Address provided by your ISP.
PPTP Subnet
Enter the PPTP Subnet Mask provided by your ISP.
Mask:
PPTP Gateway IP
Enter the PPTP Gateway IP Address provided by your ISP.
Address:
If you choose Dynamic IP or Static IP as the Address Mode, enter your PPTP Server IP
address:
PPTP Server IP
Enter the PPTP Server IP address provided by your ISP.
Address:
D-Link DIR-825+ User Manual
Username / Password Connection (PPPoE)
Username / Password Connection (PPTP)
SET USERNAME AND PASSWORD CONNECTION (PPPOE)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. If you do
not have this information, please contact your ISP.
User Name :
Password :
Cancel
Prev
SET USERNAME AND PASSWORD CONNECTION (PPTP)
To set up this connection you will need to have a Username and Password from your Internet Service Provider. You also
need PPTP IP address. If you do not have this information, please contact your ISP.
Address Mode : ž Dynamic IP š Static IP
PPTP IP Address :
PPTP Subnet Mask :
PPTP Gateway IP Address :
PPTP Server IP Address (may be
same as gateway):
User Name :
Password :
Verify Password :
DNS SETTINGS
Primary DNS Address :
Secondary DNS Address :
Cancel
Prev
Next
Next
19
Advertisement
Table of Contents
