NEC Express5800/R120g Maintenance Manual page 214

Chapter 3 Appendix
disk
153
When creating logical drive by Universal
RAID Utility
SNMP
1500
When installing an OS
Service Control
Manager
7023
When installing an OS
Service Control
Manager
7023
When installing an OS
Service Control
Manager
7023
When starting an OS or shutting down
an OS
Service Control
Manager
7030
When installing an OS
Microsoft-Windows-
WinRM
10149
When installing an OS
214
The I/O operation at the logical block address for disk was retried.
•
The on-screen indication may differ depending on system
Warning environment.
• The character string of this event may not be displayed correctly,
however, it does not affect the system operation.
If this event is logged when creating a logical drive by Universal RAID
Utility, there is no problem in system operation.
The character string of the event will be correctly displayed by applying
the Microsoft's update program on the following site:
http://support.microsoft.com/kb/2925479
The SNMP Service encountered an error while accessing the registry
key
Error
SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfigu
ration.
If this event is logged only when SNMP is enabled and does not occur
repeatedly, there is no problem with system operation.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2002303/
The Network List Service terminated with the following error:
Error
The device is not ready.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The IP Helper service terminated with the following error:
Error The service cannot be started, either because it is disabled or because
there are no enabled devices associated with it.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The WMI Performance Adapter service terminated with the following
Error error:
The error cannot be identified.
Ignore this error because there is no impact on the system.
Printer Extensions and Notifications service is marked as interactive
Error service. However, the system is not allowed to use interactive service.
Thus, this service might not work correctly.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
Warning The WinRM service is not listening for WS-Management requests.
If this event is logged together with ID 7036 "Service Control Manager
(Windows Remote Management (WS-Management) service has
stopped.), there is no problem in system operation.
Also, if WinRM event 10148 (WinRM service is listening
WS-Management requests.) is output immediately after this event,
there is no problem in system operation.
Express5800/R120g-2E, T120g Maintenance Guide
2. List of Windows Event Logs