Rs 232/422/485 Control Mode Operation; Accessories And Spare Parts; Options - Varian Turbo-V 300 ICE Instruction Manual

TECHNICAL INFORMATION
If the Soft Start has been deselected the display shows:
P U M P R E A D Y
R E M O T E
With or without Soft Start mode selected the START/STOP
and LOW SPEED front panel push- buttons are
inoperative, while the CYCLE NUMBER and PUMP
CURRENT pushbuttons are always active.

RS 232/422/485 Control Mode Operation

If the RS 232 option is installed and the controller has been
programmed for RS 232 operation, the controller may be
driven by a computer and when ready to operate, the
display shows:

ACCESSORIES AND SPARE PARTS

J1 input mating connector
P7 mating plug
Pump-controller connection cable
Mains cable (European plug, 3 m long)
Mains cable (American plug, 120 V, 3 m long)

OPTIONS

RS 485 computer communication kit
RS 232 computer communication kit
RS 422 computer communication kit
P2 output mating connector
Flow Meter with swagelok attachment kit
Flow Meter with flange attachment kit
Heater Jacket
68
: U S E
S T A R T H S
Description
Description
P U M P R E A D Y
R S 2 3 2
If the Soft Start has been deselected the display shows:
R E A D Y
S O F T S T A R T
The value which corresponds to the board installed will be
assigned to RSXXX
With or without
START/STOP, LOW
computer control, while the CYCLE NUMBER and PUMP
CURRENT front panel pushbuttons are always active.
969-9853
969-9854
969-9953
SR-03-661817-01
SR-03-661818-02
969-9856
969-9857
969-9858
969-9852
969-9114
969-9115
969-9818
TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
: U S E
L I N E
F O R R S 2 3 2
Soft Start mode selected
SPEED functions are
Part number
Part number
H S
H S
the
under