Varian Turbo-V 300 ICE Instruction Manual
  1. Manuals
  2. Brands
  3. Varian Manuals
  4. Controller
  5. Turbo-V 300 ICE
  6. Instruction manual

Varian Turbo-V 300 ICE Instruction Manual

Hide thumbs Also See for Turbo-V 300 ICE:
Table of Contents
  • Table of Contents
  • Istruzioni Per L'uso
  • Gebrauchsanleitung
  • Mode D'emploi
  • Istrucciones de Uso
  • Istruções para O Uso
  • Gebruiksaanwijzingen
  • Brugsanvisning
  • Bruksanvisning
  • Brukerveiledning
  • Käyttöohjeet
  • Instructions for Use
  • Technical Information
  • Turbo-V 300 Ice Controller Description
  • Controller Specification
  • Controller Outline
  • Fuse Holder and Voltage Changer Assembly
  • Interconnections
  • Connection P1 Logic Input Interconnections
  • Optional Serial Port
  • Serial Port Installation
  • Serial Communication Port J13 and J14
  • RS 485 Communication Description
  • Message Structure
  • Window-Based Protocol
  • Use
  • General
  • Startup
  • Front/Remote/Serial Selection
  • Starting the Pump
  • Monitor Relay Programming
  • Operating the Pump
  • Pump Shutdown
  • Power Failure
  • Remote Control Mode Operation
  • RS 232/422/485 Control Mode Operation
  • Accessories and Spare Parts
  • Options
  • Maintenance

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 77

Quick Links

Download this manual
Turbo-V 300 ICE
controller
Model 969-9433
Model 969-9533
87-900-902-01 (G)
JANUARY 2002
vacuum technologies
MANUALE ISTRUZIONI
BEDIENUNGSHANDBUCH
NOTICE DE MODE D'EMPLOI
MANUAL DE ISTRUCCIONES
MANUAL DE ISTRUÇÕES
BEDRIJFSHANDLEIDING
ISTRUKSTIONSBOG
BRUKSANVISNING
INSTRUKSJON MANUAL
OHJEKÄSIKIRJA
Ο∆ΗΓΙΕΣ ΧΡΗΣΕΩΣ
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Varian Turbo-V 300 ICE

Summary of Contents for Varian Turbo-V 300 ICE

  • Page 1 Turbo-V 300 ICE MANUALE ISTRUZIONI controller BEDIENUNGSHANDBUCH NOTICE DE MODE D’EMPLOI MANUAL DE ISTRUCCIONES Model 969-9433 MANUAL DE ISTRUÇÕES Model 969-9533 BEDRIJFSHANDLEIDING ISTRUKSTIONSBOG BRUKSANVISNING INSTRUKSJON MANUAL OHJEKÄSIKIRJA Ο∆ΗΓΙΕΣ ΧΡΗΣΕΩΣ INSTRUCTION MANUAL 87-900-902-01 (G) JANUARY 2002...
  • Page 2 Turbo-V 300 ICE Controller...

  • Page 7: Table Of Contents

    BRUKERVEILEDNING ....................KÄYTTÖOHJEET ..........................................3'+*,(6&5+6(:6 INSTRUCTIONS FOR USE ................... TECHNICAL INFORMATION ..................TURBO-V 300 ICE CONTROLLER DESCRIPTION ............... CONTROLLER SPECIFICATION ....................CONTROLLER OUTLINE ....................... FUSE HOLDER AND VOLTAGE CHANGER ASSEMBLY.............. INTERCONNECTIONS ........................Connection P1 - Logic Input Interconnections ...............
  • Page 8 USE ..............................General ..........................Startup ........................... Front/Remote/Serial Selection ....................Starting the Pump ........................Monitor Relay Programming ....................Operating the Pump....................... Pump Shutdown ........................Power Failure ........................Remote Control Mode Operation ..................RS 232/422/485 Control Mode Operation ................ACCESSORIES AND SPARE PARTS ................... OPTIONS ............................

  • Page 9: Istruzioni Per L'uso

    I controller pilotano lasciar cedere il controller e a non sottoporlo ad urti. le pompe della serie Turbo-V 300 ICE (con un Non disperdere l’imballo nell’ambiente. II materiale è processo suddiviso in dieci passi) durante la fase di...
  • Page 10 è collegata al 5. Display alfanumerico a cristalli liquidi: matrice di sistema o non è chiusa con la flangia di chiusura. punti, 2 linee x 16 caratteri. Pannello frontale del Controller 969-9433 e 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 11 STOP del pannello frontale. normative nazionali specifiche. MANUTENZIONE MESSAGGI DI ERRORE I controller della serie Turbo-V 300 ICE non richiedono In alcuni casi di guasto la circuiteria di autodiagnosi del alcuna manutenzione. Qualsiasi intervento deve essere controller presenta alcuni messaggi di errore elencati eseguito da personale autorizzato.
  • Page 12 Controllare il corretto funzionamento del FLOW METER ALARM valore del flusso è rimasto ad un valore circuito di alimentazione del gas. inferiore alla soglia impostata, per un tempo maggiore o uguale a 10 secondi. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 13: Gebrauchsanleitung

    örtlichen Selbstschutzsystem. Die Controller steuern die Pumpen Verkaufsstelle gemeldet werden. der Serie Turbo-V 300 ICE (durch einen 10-Schritte- Beim Auspacken vorsichtig vorgehen, damit der Prozeß) in der Startphase, indem sie die Spannung und Controller nicht fällt oder Stößen ausgesetzt wird.
  • Page 14 5 . A lphanumerisches Flüssigkristall-Displa y : einschalten, wenn der Eingangsflansch nicht am Punktmatrix , 2 Z eilen mit 1 6 Stellen. System angeschlossen bzw. nicht Schließflansch abgedeckt ist. Fronttafel der Controller 969-9433 und 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 15 Fronttafel gedrückt werden. FEHLERMELDUNGEN WARTUNG In einigen Störungsfällen zeigt das Selbstdiagnoses- Die Controller der Serie Turbo-V 300 ICE sind system des Controllers die in der nachstehenden wartungsfrei. Eventuell erforderliche Eingriffe müssen Tabelle zusammengefaßten Meldungen an. von dazu befugtem Fachpersonal ausgeführt werden.
  • Page 16 Firma Varian zur Instandsetzung zu Rate ziehen. Alarm hinsichtlich Auswurffluß. Der Einwandfreien Betrieb des FLOW METER ALARM Flußwert befindet sich für die Dauer Gasversorgungskreises überprüfen. von mehr als oder gleich 10 Sekunden einem Wert unterhalb eingestellten Schwelle. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 17: Mode D'emploi

    Le contrôleur est fourni dans un emballage de protec- nationales spécifiques. tion spécial; si l'on constate des marques de dommages Les contrôleurs de la série Turbo-V 300 ICE sont des pouvant s'être produits pendant le transport, contacter convertisseurs de fréquence, contrôlés par un micropro- aussitôt le bureau de vente local.
  • Page 18 à l'aide de la bride de lequel il est possible de sélectionner certains para- serrage. mètres opérationnels. 5. Ecran alphanumérique à cristaux liquides: matrice de points, 2 lignes x 16 caractères. Tableau frontal des Contrôleurs 969-9433 et 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 19 MESSAGES D'ERREUR ENTRETIEN Dans certains cas de panne, l'ensemble de circuits Les contrôleurs de la série Turbo-V 300 ICE n'exigent d'autodiagnostic du contrôleur présente certains mes- aucun entretien. Toute opération doit être effectuée par sages d'erreur indiqués dans le tableau ci-dessous.
  • Page 20 Alarme concernant le flux de purge. La Vérifier le bon fonctionnement du circuit valeur du flux est restée au dessous du d’alimentation du gaz. seuil défini pour une période supérieure ou égale à 10 secondes. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 21: Istrucciones De Uso

    El controler se suministra en un embalaje de protección nacionales específicas. especial; si se observan señales de daños, que podrían Los controlers de la serie Turbo-V 300 ICE son haberse producido durante el transporte, ponerse en convertidores de frecuencia, controlados por un contacto con la oficina de venta más cercana.
  • Page 22 5 . Displa y alfanumérico de cristales líquidos: matriz está cerrada con la brida de cierre. de puntos, 2 líneas x 1 6 caracteres. Panel frontal del controler 969-9433 y 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 23 MANTENIMIENTO algunos casos avería circuitos Los controlers de la serie Turbo-V 300 ICE no necesitan autodiagnosis del controler presenta algunos mensajes ningún mantenimiento. Cualquier operación ha de ser de error detallados en la tabla siguiente. efectuada por personal autorizado. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 24 FLOW METER ALARM limpieza (purge). El valor del flujo se circuito de alimentación del gas, ha quedado a un valor inferior deI limen impostado durante un tiempo mayor o igual de 10 segundos. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 25: Istruções Para O Uso

    Durante a retirada da embalagem, tomar muito cuidado Os controllers comandam as bombas da série para não deixar cair o controller e para não submetê-lo Turbo-V 300 ICE (com um processo subdividido em dez a choques. passos) durante a fase de activação, controlando a Não depositar a embalagem no meio ambiente.
  • Page 26 é possív el programar alguns fechado com o flange de fecho. parâmetros operativos. M ostrador alfanumérico a cristais líquidos: matriz por pontos, 2 linhas x 1 6 caracteres Painel frontal do Controller 969-9433 e 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 27 STOP do painel frontal. específicas. MANUTENÇÃO MENSAGENS DE ERRO Os controllers da série Turbo-V 300 ICE não Em alguns casos de defeitos, os circuitos de requerem qualquer manutenção. Todas as operações autodiagnóstico do controller apresentam mensagens devem ser efectuadas por pessoal autorizado.
  • Page 28 Alarme relativo ao fluxo de descarga. O Verificar se o circuito de alimentação do FLOW METER ALARM valor do fluxo permaneceu num valor gás funciona correctamente. inferior ao limite estabelecido, durante um tempo maior ou igual a 10 segundos. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 29: Gebruiksaanwijzingen

    • relatieve vochtigheid: 0 - 95% (niet condenserend) te nemen. Varian acht zich niet aansprakelijk voor de gevolgen van het niet of gedeeltelijk in acht nemen van de aanwijzingen, onoordeelkundig gebruik door niet...
  • Page 30 Alfanumeriek display met vloeibare kristallen (LCD): puntjespatroon, 2 lijnen x 16 karakters. Frontpaneel van de controllers 969-9433 en 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 31 ONDERHOUD FOUTMELDINGEN De controllers van de serie Turbo-V 300 ICE zijn In geval van bepaalde storingen wekt het zelfdiagnose- onderhoudsvrij. Eventuele werkzaamheden moeten door circuit van de controller enkele foutmeldingen op die in bevoegd personeel worden uitgevoerd.

  • Page 32: Brugsanvisning

    Varian, før udstyret anvendes. temperatur: fra -20 °C til +70 °C • Varian tager ikke ansvar for skader helt eller delvis som relativ luftfugtighed: 0 - 95% • følge af tilsidesættelse af disse instruktioner, fejlagtig (ikke kondenserende) brug af personer uden tilstrækkelig kendskab, ukorrekt...
  • Page 33 16 tegn. et bord. Dette er for at forebygge skader på apparatet og personer. Start aldrig pumpen, hvis pumpetilløbet ikke er tilsluttet systemet eller er blokeret. Frontpanelet på Styreenheden 969-9433 og 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 34 Stop af pumpen Pumpen stopper ved at trykke på STOP-trykknappen på Skrotning af pumpen skal foregå i overensstemmelse frontpanelet. med det pågældende lands særlige love. VEDLIGEHOLDELSE FEJLMEDDELELSER Styreenhederne i Turbo-V 300 ICE-serien behøver ikke Når visse fejl opstår, viser styreenheden nogen vedligeholdelse.
  • Page 35 Såfremt meddelelsen fremvises på ny, rettes henvendelse Varian foretagelse af vedligeholdelse. Alarm for udluftningsventil. Værdien for Kontrollér, at kredsløbet til gasforsyning FLOW METER ALARM gennemstrømningen under fungerer korrekt. indtastede tærskelværdi i et tidsrum på min. 10 sekunder. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 36: Bruksanvisning

    85/399 om miljöskydd. Styrenheterna omfattar alla kretsar som behövs för automatisk drift av pumparna i Turbo-V 300 ICE-serien. Hjälpkontakter erbjuder kontroller för fjärrstart och fjärrstopp av pumpen, signaler för pumpens tillstånd, kontroller för start och stopp av förvakuumpumpen, blockeringssignaler (för tryckvakter, kontrollbrytare för...
  • Page 37 Sätt aldrig igång pumpen, om 2 rader med 1 6 tecken. intagsflänsen varken är kopplad till systemet eller är blockerad på plats med låsflänsen. Frontpanelen på Styrenheten 969-9433 och 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 38 STOPP på frontpanelen. FELMEDDELANDEN UNDERHÅLL När vissa uppstår visar styrenhetens Styrenheterna Turbo-V ICE-serien är självdiagnoskrets aktuellt felmeddelande på displayen. underhållsfria. Allt servicearbete måste utföras av De möjliga meddelandena listas i följande tabell. auktoriserad personal. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 39 Om meddelandet upprepas kontakta Varian för underhåll. Larm angående rengöringsflödet. Kontrollera korrekt funktion av gasens FLOW METER ALARM Värdet är under inmatade matningskrets. tröskelvärdet under 10 sekunder eller längre. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 40: Brukerveiledning

    Når styreenhetene transporteres eller lagres, må brukere. Brukeren bør lese denne brukerveiledningen og følgende forhold være oppfylt: all annen informasjon fra Varian før utstyret tas i bruk. temperatur: fra 20 °C til +70 °C • Varian kan ikke holdes ansvarlig for hendelser som relativ fuktighet: 0 - 95% (uten kondens) •...
  • Page 41 LC D-displa y med siffer og boksta v er: punktmatrise, dersom den er blokkert av låseflensen må pumpen aldri 2 rader med 1 6 tegn. startes opp. Frontpanelet på styreenheten 969-9433 og 969-9533 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 42 Når det oppstår visse feil viser selvdiagnosekretsen i vedlikeholdsfrie. Alt arbeid på styreenheten må kun styreenheten den aktuelle feilmeldingen i displayet. De utføres av autorisert personell. aktuelle feilmeldingen fremgår av tabellen nedenfor. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 43 Varian for vedlikehold. Alarm purgestrømningen. Kontroller at gassmatekretsen fungerer FLOW METER ALARM Strømningsverdien har i 10 sekunder riktig. eller mer, blitt liggende på en verdi som er lavere enn innstilt terskel. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 44: Käyttöohjeet

    EU:n 85/399 direktiiviä ympäristön suojelusta. pumpun saavuttamaan nopeuteen. Ne sisältävät kaikki virtapiirit, jotka ovat välttämättömiä Turbo-V 300 ICE - sarjan pumppujen automaattiselle toiminnalle. Apuliittimien kautta voidaan käyttää...
  • Page 45 Valvojien 969-9433 ja 969-9533 etupaneelit se on vakaa. Näin vältytään vammoilta ihmisille sekä itse koneelle. Älkää myöskään käyttäkö pumppua, mikäli sisääntulon laippaa ei ole kytketty järjestelmään tai mikäli sitä ei ole suljettu laippasulkijalla. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 46 Pumppu pysähtyy painettaessa etupaneelissa olevaa STOP-painonappia. Mikäli valvoja täytyy romuttaa, toimikaa hävittämisessä kansallisten säädösten ja normien määräämällä tavalla. HUOLTO Turbo-V 300 ICE -sarjan valvojia ei tarvitse huoltaa VIANETSINTÄ millään tavoin. Mahdolliset valvojaan tehtävät toimenpiteet tulee jättää aina valtuutetun henkilön Joidenkin toimintahäiriöiden yhteydessä...
  • Page 47 Jos viesti ilmaantuu uudelleen, ottakaa yhteys Varianiin huoltoa varten. Puhdistusvirtaukseen liittyvä hälytys. Tarkista kaasun syöttöpiirin FLOW METER ALARM Virtausarvo jäänyt asetettua asianmukainen toiminta. kynnysarvoa alhaisemmaksi vähintään 10 sekunnin ajaksi. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 48 • : -20 °C °C Varian • 0 - 95% Varian Turbo-V Turbo-V 85/399 Turbo-V ICE. (heater jacket), purge valve). "Technical Information" Varian • 220 Vac • 120 Vac 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 49 : 0 - 95 % HIGH/LOW SPEED ""Technical Information" HIGH SPEED LOW SPEED START, STOP RESET " " cycle number, cycle time pump life pump current, pump temperature, pump power rotational speed, (Controller) TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 50 (120 Vac, 1 A) (vent device, heater jacket. RS-232 - RS-422 - RS- 485 heater jacket. (flow meter). Varian "Varian advance exchange service" START STOP Turbo-V 300 ICE 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 51 PUMP WAITlNG INTERLOCK interlock interlock interlock FAULT: PUMP OVERTEMP. 60 °C START FAULT: CONTROLLER 90 °C OVERTEMPERATURE START FAULT: TOO HIGH LOAD START FAULT: SHORT CIRCUIT START START OVERVOLTAGE controller controller Varian FLOW METER ALARM TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 52: Instructions For Use

    (within steps) Do not dispose of the packing materials in an Turbo-V 300 ICE pump during the starting phase by unauthorized manner. The material is 100% recyclable controlling the voltage and current respect to the speed and complies with EEC Directive 85/399.
  • Page 53 Never operate the Turbo-V pump if the pump inlet is not connected to the system or blanked Controller 969-9433, off. 969-9533 front panel TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 54 MAINTENANCE ERROR MESSAGES The Turbo-V 300 ICE series controller does not require For a certain type of failure, the controller will self- any maintenance. Any work performed on the diagnose the error and the messages described in the controller must be carried out by authorized personnel.
  • Page 55 Alarm relating to the purge flow. The Check the correct operation of the gas FLOW METER ALARM flow value remained at less than the set supply circuit. threshold for 10 seconds or more. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 56: Technical Information

    • Rear panel with input/output connectors The controller can be operated via: • Front panel switches • Remote signals via rear panel connectors • RS 232/485/422 serial link (option). Turbo-V 300 ICE controllers 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...

  • Page 57: Controller Specification

    OUTPUT signals (sockets) Output fan Voltage and Valve, forepump socket J14, J13 RS 232/422/485 connection (optional) Interconnecting cables Mains cable (3-wire, 3-meter long) Pump cable (6-wire, 5-meter long) Weight (both models) 11.3 kg (24.9 lbs) TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 58: Controller Outline

    TECHNICAL INFORMATION CONTROLLER OUTLINE The outline dimensions for the Turbo-V 300 ICE controllers are shown in the following figures: Controller models 969-9433 and 969-9533 outline 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...

  • Page 59: Fuse Holder And Voltage Changer Assembly

    To change the power supply voltage rating after having removed the assembly as explained above, extract the voltage changer and then reposition it to view the desired voltage rating. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 60 In the presence of both S1 and S2 signals, the one that reaches the processor first is executed. NOTE Pin 3-8 must be shorted to allow the Turbo-V 300 ICE pump to start if no interlock contact is connected. If +24 V...
  • Page 61 CAUTION! The output voltage of the connector J7 is 120 Vac and the maximum current is 1A. Do not connect this plug to a device with a leakage current greater than 1.75 mA. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 62: Optional Serial Port

    P6 on the controller and then secure it in place CAUTION! using screw A (3x6), which is not provided. Use this connector (J11) only with the Varian solid • Insert the flat cable through the rear panel and plug state flowmeter model 969-9114 or 969-9115. Any it into the socket P1 located on the Interface board.

  • Page 63: Serial Communication Port J13 And J14

    The master system (PC) starts every session sending the following message to the slave units connected: <STX> / <ADDR> + <WINDOW> + <COMMAND> + <DATA> + <ETX> + <CRC> Communication RS 422 serial port connections TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 64 Length Characters Permitted Logic (L) ‘0’=OFF ADDR WINDOW WR OF ‘1’=ON Numeric (N) ‘0’...’9’ Source : Inverter (Justifield to the right Destination : PC with ‘0’) Alphanumeric (A) max 10 ‘ ‘...’_’ ADDR 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 65 80 hex. Source : Inverter Destination : PC 32 30 30 30 30 30 30 2E 30 30 03 39 44 STX ADD WINDOW RD 000.00 ETX CRC TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 66: Window-Based Protocol

    N PUMP LIFE (0-999.999) IN HOURS A CRC PROGRAM LISTING A CRC PARAMETER LISTING WIN = Window T = Type: = Read L = Logical N = Numeric = Write A = Alphanumeric 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...

  • Page 67: Use

    P U M P can be switched on at the same time. NOTE NOTE When the Turbo-V 300 ICE pump is baked by a membrane pump, the Soft Start mode should be After pressing the START push-button, if the P1 deselected.

  • Page 68: Front/Remote/Serial Selection

    CURRENT push-button is used to enter and confirm the value. At any time it is possible to exit this routine by pressing the CYCLE and PUMP CURRENT pushbuttons at the same time for at least 2 seconds. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 69 KRPM. Press the CYCLE NUMBER push-button to select the first number. S E T T I N G : X X ° Heater jacket operating temperature selection. The range is 40-90 °C, set to 65 °C by default. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 70 XXXXXX = means the word FRONT. REMOTE, or SER depending on the last selection. The controller is factory-set for FRONT panel operation. SER will only be displayed if the optional serial card is installed. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 71 XX = 00 ÷ 31 is the unit address This message will only be displayed if the RS232 interface is present. where:SELECTION: XXXXX = means HOST or PRINT. The controller is factory-set to HOST. TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)
  • Page 72 S T A R T B U T T O N and the controller is ready to restart (see paragraph "Startup"). NOTE When PUMP LIFE is reset to 000, the CYCLE number is also reset to 000. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...

  • Page 73: Starting The Pump

    N O R M A L O P E R A T I O N K R P M where: XX = indicates the rotational speed (53 KRPM for high speed, or 24 KRPM for low speed). TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 74: Monitor Relay Programming

    R E M O T E speed of the pump and then accelerates linearly up to the nominal speed or within steps if the Soft Start has been S O F T S T A R T selected. 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...

  • Page 75: Rs 232/422/485 Control Mode Operation

    RS 232 computer communication kit 969-9857 RS 422 computer communication kit 969-9858 P2 output mating connector 969-9852 Flow Meter with swagelok attachment kit 969-9114 Flow Meter with flange attachment kit 969-9115 Heater Jacket 969-9818 TURBO-V 300 ICE CONTROLLER - 87-900-902-01 (G)

  • Page 76: Maintenance

    TECHNICAL INFORMATION MAINTENANCE 87-900-902-01 (G) - TURBO-V 300 ICE CONTROLLER...
  • Page 77 NOTE: If a product is received at Varian which is contaminated with a toxic or hazardous material that was not disclosed, the customer will be held responsible for all costs incurred to ensure the safe handling of the product, and is liable for any harm or injury to Varian employees as well as to any third party occurring as a result of exposure to toxic or hazardous materials present in the product.
  • Page 78 Request for Return FAILURE REPORT TURBO PUMPS and TURBOCONTROLLERS POSITION PARAMETERS Power: Rotational Speed: Does not start Noise Vertical Current: Inlet Pressure: Does not spin freely Vibrations Horizontal Temp 1: Foreline Pressure: Does not reach full speed Leak Upside-down Mechanical Contact Overtemperature Other: Temp 2:...
  • Page 79 Tel: (39) 011 997 9111 Tel: (39) 011 997 9111 Fax: (39) 011 997 9350 Brazil Fax: (39) 011 997 9350 Varian Industria e Comercio Ltda. Japan Avenida Dr. Cardoso de Mello 1644 Internet Users: Varian Vacuum Technologies Vila Olimpia Customer Service &...

This manual is also suitable for:

969-9433969-9533

Table of Contents