ASSEMBLING the PCR Workstation
The PCR Workstation should be assembled by two people, directly at the site of operation. We
recommend the wearing of safety gloves for hand protection.
Step 1
Put the base on an even surface with the
rubber feet facing down and the sensor cable
outlet facing to the front. Lay the back panel
onto the base with the power outlets facing
down, and the power input and the type label
facing to the right.
Connect both sensor cables.
Slide the connection assembly into the cavity
of the back panel.
7
vwr.com I Instruction manual VWR
PCR Workstation
®
Base
Back panel