EPSON TMNet WebConfig
EPSON TMNet WebConfig is a Utility to set the product on a web browser.
This section describes EPSON TMNet WebConfig using Internet Explorer as a browser.
Starting EPSON TMNet WebConfig
Follow the steps below to start up EPSON TMNet WebConfig.
1
Start up a PC connected to the network.
2
Start up the web browser, and input the following.
http://This product's IP address/webconfig
EPSON TMNet WebConfig starts.
For the product's IP address, see the status sheet. For the status sheet, see
firming with a status sheet" on page
A user name and a password will be required on the authentication screen. Enter
"epson" for both the user name and the password. You can change the password on
the [Password Setting] screen (see
Password" on page
103.).
Chapter 3
Application Development Information
58.
"Admin Settings - Administrator Information -
"Con-
3
77