How To Extract Water From The Dispenser; User Interface; How To Access The Filters; Periodic Maintenance - Kinetico columbia aqua FC-725-ROP-UV Technical User's Manual

Table of Contents

Advertisement

15. HOW TO EXTRACT WATER
To draw cold water: Press the lever on the right side
of the dispenser with the glass to let the cold water
flow (1).
To draw ambient water (if your dispenser model is
equipped with it): Press the lever at the centre of the
dispenser with the glass to let the ambient water flow
(1).
Draw hot water: Press and hold down the release
button on the left-hand faucet and then press the
lever at the centre of the dispenser with the tumbler
to make the hot water flow (1). and then press the lever
on the left-hand side with the tumbler to let the hot
water flow (2).

18. USER INTERFACE

The hot light, lit in red, indicates that the system is
active and is heating the water.
The power light indicates that the equipment is co-
rrectly plugged in.
The cool light, lit in blue, indicates that the cooling
system is active and is cooling the water.
Technical sheet

17. HOW TO ACCESS THE FILTERS

Grasp the lower front cover with both hands and pull it
away from the unit while pulling it slightly downward.
18. USER MAINTENANCE
Empty the dispenser drip tray daily if it is not connec-
ted to a drain. To remove it, hold it by the sides and
pull it upwards.
Periodically spray the water outlet nozzles of the
faucets with hydrogen peroxide spray, let it stand for
a few minutes and draw a few glasses of water for
rinsing.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Columbia aqua fc-725-uf-uvColumbia aqua fc-725-f-uv

Table of Contents