PROAIM JB-VG12-01 Assembly Manual page 3

•
Loose and remove the Center knob of end
section.
Middle Section Assembly
•
The central part has connecting bars
attached at both the ends, slide the middle
section into the slots of the end section.
•
After sliding the middle section into the slot
of the end section, insert the locking knob
in the threads present on top and bottom of
the section.
•
Tighten the knobs to completely secure the
section.
•
Now, loosen and remove the top knob of
middle section.
Front Section Assembly
•
The front section has connecting bars
attached at both ends, slide the front
section into the slots of the middle section.
3