Vega Jib Setup
•
Completely stretch and open the end
section of Vega Jib, as shown in the image.
•
After opening the end section, loosen the
bottom and side knobs of the Central Fork.
•
The end section is properly open, now.
Feature: Central Fork mechanism facilitates
ultra-smooth
pan-tilt
absorbing unwanted vibrations for cleaner
shots.
End Section Assembly
•
Mount the end section of the Vega Jib on
the Jib Stand
(Not
Included).
•
After mounting the end section, tighten the
knob while aligning the holes with each
other.
•
Loosen and remove the top knob of the end
section.
movements
while
2