Using The Basic Functions Of The Air Purifier; Start/Stop; Adjusting The Fan Speed - LG AS60GHWG0 Owner's Manual

18 USING
Using the Basic Functions of
the Air Purifier

Start/Stop

Turns the product on and off.
• Press the Start/Stop button.
NOTE
• The most recently used mode is memorized if
the power supply is cut off as a result of a power
failure.
• When the operation begins, the display of
sensor ready will appear for approximately 30
seconds.

Adjusting the Fan Speed

You can adjust the fan speed from the air purifier.
Press the Start/Stop button to turn on the
1
product.
To adjust the fan speed, press the Speed
2
button.
• When you press the button during product
operation, the fan speed changes in the
order of Auto → Low → Medium → High
→ Turbo.
NOTE
• When the operation is started for the first time,
Auto is set as the fan speed. In Auto mode, the
fan speed is adjusted automatically according to
the contamination level of indoor air.
• The fan speed is displayed on the display panel
when it is adjusted. The indication of fan speed
increases by 2 columns at a time. It is displayed
as below when the fan speed is set to Medium.
EN