Only); Downloading Hp Pc Hardware Diagnostics Uefi To A Usb Flash Drive; Downloading The Latest Hp Pc Hardware Diagnostics Uefi Version - HP ZBook Power G10 Maintenance And Service Manual

a. Connected USB flash drive
NOTE:
Downloading the latest HP PC Hardware Diagnostics UEFI version on page
b. Hard drive
c. BIOS
3. When the diagnostic tool opens, select the type of diagnostic test that you want to run, and then
follow the on-screen instructions.
Starting HP PC Hardware Diagnostics UEFI through HP Hotkey Support software
(select products only)
This section describes how to start HP PC Hardware Diagnostics UEFI through HP Hotkey Support
software.
NOTE: You must disable fast boot to access HP PC Hardware Diagnostics UEFI from the HP System
Information application. To disable fast boot:
1. Turn on or restart the computer, and when the HP logo appears, press
2. Select Advanced, and then select Boot Options.
3. Clear Fast Boot.
4. Select Save Changes and Exit, and then select Yes.
1. From the Start menu, open the HP System Information Application or enter fn+esc.
2. In HP System Information screen, select Run System Diagnostics, select Yes to run the application,
and then select Restart.
IMPORTANT:
NOTE: When the restart is complete, the computer will boot to HP PC Hardware Diagnostics UEFI
Application. Proceed with the troubleshooting tests.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in some situations.
● HP PC Hardware Diagnostics UEFI is not included in the preinstallation image.
● HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.
● The hard drive is damaged.
NOTE: The HP PC Hardware Diagnostics UEFI downloading instructions are provided in English only,
and you must use a Windows computer to download and create the HP UEFI support environment
because only .exe files are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive, follow this
procedure:
Starting HP PC Hardware Diagnostics UEFI through HP Hotkey Support software (select products only)
To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see
To prevent loss of data, save your work in all open apps before restarting your computer.
153.
f10 to enter Computer Setup.
153