Table of Contents
Advertisement
Resetting to Factory Default Settings
If the camera no longer functions as expected, you can choose to reset the camera to its factory default settings.
Use the firmware revert button to reset the camera. The firmware revert button is shown in the following
diagram:
NOTE: For the ES camera models, resetting the camera will erase all recorded video from the camera.
For models that feature an SD card slot, resetting the camera will not affect video that has been recorded to the
SD card.
Figure 3:
The firmware revert button on the rear of the camera
1. Ensure the camera is powered on.
2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
CAUTION — Do not apply excessive force. Inserting the tool too far will damage the camera.
Resetting to Factory Default Settings
12
Advertisement
Table of Contents
