Lincoln Electric 10357 Operator's Manual page 36

C-2
INPUT CABLE ASSEMBLIES: (One required per DH-10 Control Box)
K1501-10 (Control Cable Only) Consists of a 9-conductor con-
trol cable with a 14-pin control cable plug, without electrode
cable, and is available in lengths of 10 ft. (3 m).
K1797-25 Consists of a 14-conductor control cable extension
25ʼ(7.62m) in length.
K1797-50 Consists of a 14-conductor control cable extension
50ʼ(15.24m) in length.
K1520-1 115V/42V TRANSFORMER KIT Required to use DH-10 with
Lincoln Power Sources without 42VAC auxiliary and a 14-pin connec-
tor receptacle. These power sources include the DC-250, DC-600, DC-
1000 and Pulse Power 500. Also can be used with older DC-400 mod-
els.
K590-6 WATER CONNECTION KIT (One per gun) Includes water
cooled gun tube fittings and self-sealing outlet and inlet quick-connec-
tors for mounting into the DH wire drive connection box.
K659-1 GAS GUARD REGULATOR (One per gun) Adjustable flow
regulator with removable adjustor key for CO2 and Argon blend gases.
Mounts onto wire drive gas inlet, and reduces gas waste and arc start
"blow" by reducing surge caused by excess pressure in supply hose.
K1449-1 DUAL PROCEDURE REMOTE CONTROL (One per DH-10
Control Box) Includes a remote control box with a 16 t. (5 m) length
control cable with 4-pin plug for the mating receptacle on the bottom of
the DH-10 control box. The remote control box contains a procedure
selector switch and 2 rotating knob encoders, one controls arc voltage
and the other controls wire feed speed, which function the same as
comparable controls on the DH-10 front panel, when the remote is con-
nected and selected by the DH-10 Procedure Key.
K1450-"L" - Extension cables are available in lengths "L" of 12, 16 or
25 ft. (3.6, 4.9 or 7.6) to match the control to Feeder cable length used.
K1558-1 Remote Switch Interface Module, can be used with the
DH-10, using a G3041-2 (or higher) Control Board. The module
provides for user interface connection of an external switch
(flow switch, etc) which must be closed to enable the feeder
welding operation. Also, the module provides for interface con-
nection of external equipment (fume extractor, etc.) To the mod-
uleʼs isolated relay contacts which actuate when the feeder
welding gas solenoid is activated (representing welding opera-
tion in process).
When used with the DH-10, the module provides these input
and output switch function connections independently for each
head operation.
This module is necessary when using the K1536-1 waterflow
sense kit with the DH-10.
K683-1 DUAL PROCEDURE SWITCH (One per gun) -
Requires K686-2 Adapter for DH-10. Kit includes gun
switch, and mountings for Lincoln Innershield and Magnum
guns, with 15 ft. (4.5 m) control cable and 3-pin plug. K686-
2 Adapter permits 3-pin plug and 5-pin gun trigger plug to be
connected to DH-10 5-pin Trigger/Dual Procedure recepta-
cle.
ACCESSORIES
K683-3 DUAL PROCEDURE SWITCH (One per gun) Kit
includes gun switch, and mountings for Lincoln Innershield
and Magnum guns, with 15 ft. (4.5m) control cable and 5-pin
plug with two leads to connect to gun trigger.
SPINDLE ADAPTERS:
K162-1 (Not required for DH-10 Bench Models) Spindle for
boom mounting Readi-Reels and 2" (51 mm) I.D. spools
with 60 lb. (27.2 kg) capacity. User mounted to appropri-
ately prepared boom framework. Includes an easily
adjustable friction brake for control of overrun.
When a 2" (51 mm) spindle is used with Readi-Reels or
coils not on 12" (305 mm) O.D. spools, an adapter is
required:
Coil Adapter:
K1504-1 Permits 50 lb to 60 lb (22.7-27.2 Kg.) Coils to be
mounted on 2: (51 mm) O.D. spindles.
K435 Permits 14 lb. (6 kg) Innershield coils to be mounted
on 2" (51 mm) O.D. spindles.
K468 Permits 8" (203 mm) O.D. spools to be mounted on
2" (51 mm) O.D. spindles.
Readi-Reel Adapters:
K363P Adapts Lincoln Readi-Reel coils of electrode 30 lb.
(14 kg) and 22 lb. (10 kg) to a 2" (51 mm) spindle. Durable
molded plastic one piece construction. Designed for easy
loading; adapter remains on spindle for quick changeover.
K438 Adapts Lincoln Readi-Reel coils of electrode 50-60
lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.
GUN ADAPTERS (FOR 10-SERIES WIRE DRIVE HEADS)
Adapts DH heads for desired gun connection:
K489-7 for Fast-Mate (or European style) gun connections,
including Dual Schedule Fast-Mate guns.
K1500-1 for standard Lincoln Innershield gun connection,
or with Fast-Mate™ guns with K489-2 Fast-Mate Adapter
Kit. Also for Magnum 200/300/400 with K466-1 connection
kit, or Magnum 550 with K613-1.
DH-10
C-2