Setting Up Your Unit - Spirit XT385 Owner's Manual

SETTING UP YOUR TREAD
Leveling
Use a M14 Wrench to adjust the height of the Leveling Feet.
17
Plugging in and Powering On
Power the unit on by plugging it into an appropriate wall outlet,
then turn on the power switch located at the front of the treadmill
below the motor hood. Ensure that the Safety Key is installed, as
the treadmill will not power on without it.
When it is first powered on, the console will perform an internal
self-test. During this time all the lights will turn on. When the lights
go off, the Message Window will show a software version (i.e.: VER
1.0) and the Distance window will display an odometer reading.
The odometer reading displays how many virtual miles the fitness
treadmill has gone. The Time window displays how many hours
the treadmill has been used. The odometer and time will remain
displayed for only a few seconds then the console will go to the
startup dis- play. The dot matrix display will be scrolling through
the different workout profiles and the Message Window will scroll
the start-up message. You may now begin to use the console.