Parameter Settings; Contents Of This Chapter; Introduction; Fso Module - ABB ACS880 User Manual

Parameter settings 19

3
Parameter settings

Contents of this chapter

This chapter lists the parameters that you have to set in the FSO modules and the inverter
units.

Introduction

The person who configures the safety functions in the FSO module must be a competent
person as required by IEC 61508-1 clause 6. In this context, the person must have
expertise and knowledge of functional safety, the safety functions as well as the
configuration of the FSO module. We recommend our training courses on the FSO
module.
The example parameter values in this chapter are the delivered default values for the
example POUS safety function presented in this manual (+Q950). We also assume that
the FSO module is only used in this safety function and not in any other safety function at
the same time. However, the actual deliveries vary. You must always check the pre-set
parameter values against the delivery specific circuit diagrams and your application needs,
and adjust the parameter values when necessary.

FSO module

You need the Drive composer pro PC tool to set the FSO module parameters, and a
password to be able to download the configuration to the FSO module from Drive
composer pro. For the default password of the FSO module, see the FSO module user's
manual. For more information on the Drive composer pro PC tool, see Start-up and
maintenance PC tool Drive composer user's manual (3AUA0000094606 [English]).
Note: When the motor is running, you cannot change the password, adjust the
parameters, or upload or download the FSO configuration file.