HIKVISION DS-7608NI-L1/W User Manual page 82

Network Video Recorder User Manual
3. Go to Linkage Action interface of the alarm detection.
4. Select Send Email as alarm linkage action.
Configure Audio Alert
When an alarm is triggered, an audio file will be played as the linkage action.
Steps
Note
This linkage action is only available for certain events and models.
1. Check Audio Alert in Normal Linkage.
2. Click to set audio for each event.
3. Click OK.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1. Go to Linkage Action interface of the alarm input or event detection.
2. Click Trigger Alarm Output.
3. Select the alarm outputs to trigger.
4. Go to Configuration → Event → Normal Event → Alarm Output .
5. Select an alarm output item from the list. Refer to Alarm Output for details.
Configure PTZ Linkage
Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event,
or VCA detection events occur.
Steps
1. Go to Linkage Action interface of the alarm input or VCA detection.
2. Select PTZ Linkage.
3. Select the camera to perform the PTZ actions.
4. Select the preset/patrol/pattern No. to call when the alarm events occur.
Figure 6-22 PTZ Linkage
69