HIKVISION DS-7608NI-L1/W User Manual page 40

Before You Start
Ensure you have inserted the USB flash drive to the device, and it contains the network camera
●
upgrade firmware.
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade
completed.
Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.
Advanced Settings
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click More.
3. Configure the parameters as your desire.
H.265 Auto Switch Configuration
If you enable the option, the device will automatically switch to H.265 stream for the network
camera (which supports H.265 video format) for the initial access.
Upgrade
Upgrade the added network cameras.
Export/Import
The information of added network camera can be generated into an excel file and exported to
the local device for backup, including the IP address, port, password of admin, etc. And the
Network Video Recorder User Manual
27