Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 AIH-RNS(B) ADD-AN-AMP INSTALLATION GUIDE FOR SELECT 2006 AUDI Created: November 19, 2019 Revised: May 25, 2023...
Page 2
BOSE and AIH-RNS for NON- BOSE. Note: The AIH-RNSB works in BOSE and Non-BOSE applications including those needing to retain factory Bluetooth. Fig. 2 2. Connect AIH-RNS 12-pin GREEN plug to radio cavity (C) vacated in step 1...
Page 3
Warning: Prior to re-installing pins to contact carrier; the locking from contact carrier on factory GREEN plug to contact carrier tabs must be bent upwards so to lock in place after reinsertion. on AIH-RNS --see Fig. 3 OR purchase our AIH-RNSB which does not require this step.
Page 4
Installation: Bose Remove Audi radio to gain access to the connector Disconnect 12-pin GREEN plug from main connector in Fig. 6 Fig. 8 (two possible 12-pin male plugs) 4. Tap or splice blue amplifier remote turn-on wire (included), to white wire at pin 13 of factory 8-pin plug.(See Fig.5)