Base Set; Lcd Display; Operation; Outgoing Calls - Topcom Butler 170 Operating Manual

Butler 170/172

2.2 BASE SET

9 Paging button: (
• Press this button to locate the handset
10 LED (green):
• lights during a call
• flashes if the telephone rings or when paging
11 LED (red):
• lights if the base set is activated
• flashes if the handset is on the base set

2.3 LCD DISPLAY

1 Engaged symbol
2 Battery symbol
3 Out of Range symbol
4 Memory symbol
5 Paging symbol
6 Mute symbol
7 Locking symbol
8 Memory location number

3 OPERATION

3.1 Outgoing Calls

3.1.1 External Outgoing Calls

• Press the Line button.
• Dial the desired number.
• After ending the conversation, press the Line button again or place the
handset on the base set.
Remark: You can add a pause to the number by pressing the Redial/Pause button.

3.1.2 External Outgoing Calls and Block Dialling

• Dial the desired number. Correct it with the Erase button if necessary.
• Press the Line button. The number is dialled.
)
1 2
0 0 0 0 0 0 0 0 0 0 0 0 0
21
3 4 5 6 7 8
0