Spectra Logic Spectra 10K Supplementary Manual page 5

1. Access the main GUI screen. Note if any tape drives are
2. Move all tapes out of the library and drives; use the library's bulk unload feature or your backup soft-
ware.
3. Close the rotary door on the library. When all tapes are removed from the library, press the library door
button on the outside of the library and close the library door. When the door is closed, the tape slot on
the door faces in.
Warning:
1. Perform a complete system shut down. Exit all programs running on the host computer and switch
OFF the power to the host computer, the library, and any other attached equipment and SCSI periph-
erals.
Warning:
Warning:
2. Disconnect all connections to the library.
• Disconnect the AC power cord from the wall outlet and the rear of the library.
• Disconnect the SCSI cables from the rear of the library.
• If applicable, disconnect the serial cable from the RS-232 port on the rear of the library.
3. Move the library to a location where you have access to all sides of the library and sufficient table space
to place parts and work comfortably.
Note: You may find it easiest to remove the carousel when you are facing the rear of the library.
Warning:
Tape Carousel Upgrade Guide for Spectra Logic Libraries
.
LOADED
Page 5