(MIMO) system with the NI PXIe-5665 3.6 GHz (NI 5665) vector signal analyzer (VSA). The NI 5665 comprises the following modules: • NI PXIe-5603 (NI 5603) RF downconverter • NI PXIe-5653 (NI 5653) LO module •...
Page 3
Install the master NI 5665 modules in the chassis with enough room to install your slave NI 5665 devices to the left of the master device. Figure 1. NI 5665 3.6 GHz VSA Master Module Placement NI PXIe- 5622 NI PXIe-5603 NI PXIe-5653 16-Bit IF Digitizer Downconverter 20 Hz - 3.6 GHz...
Page 5
Interconnecting the Master NI 5665 Modules Figure 3. NI 5665 3.6 GHz VSA Cable Configuration NI PXIe-5622 NI PXIe-5603 NI PXIe-5653 Downconverter 20 Hz - 3.6 GHz Synthesizer 16-Bit IF Digitizer ACCESS ACTIVE ACCESS ACTIVE IF IN REF IN RF IN...
Page 7
Configuring the NI 5665 in MAX Use Measurement & Automation Explorer (MAX) to configure your National Instruments hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed with NI-RFSA.
National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt ni.com/patents file on your media, or the National Instruments Patent Notice at .
Need help?
Do you have a question about the PXIe-5603 and is the answer not in the manual?
Questions and answers