National Instruments PXIe-5665 Getting Started Manual
14 ghz vector signal analyzer mimo platform
Hide thumbs
Also See for PXIe-5665:
- Calibration manual (85 pages) ,
- Getting started manual (33 pages) ,
- Getting started manual (9 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for National Instruments PXIe-5665
Summary of Contents for National Instruments PXIe-5665
- Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
-
Page 2: Installing The Modules
PXIe-5653 module. Slave PXIe-5665 devices refer to the additional analyzer channels that receive daisy-chained LO and Reference Clock signals. Installing the Modules The PXIe-5665 MIMO test system equipment setup requires you to install a master PXIe-5665 and additional PXIe-5665 slave devices in your PXI Express chassis. Note The following installation instructions use semi-rigid cables when making some module connections. - Page 3 PXIe-5665 14 GHz VSA MIMO test systems with four or more channels. Install the PXIe-5665 master device in your chassis. To use the cables included with your module kit, install the PXIe-5622 IF digitizer module immediately to the left of the PXIe-5605 RF downconverter module, and install the PXIe-5653 LO module immediately to the right of the PXIe-5605.
- Page 4 1. Master PXIe-5665 14 GHz VSA 2. Slave PXIe-5665 14 GHz VSA Interconnecting the Modules This section describes how to interconnect the master PXIe-5665 modules and how to connect the slave PXIe-5665 modules to the master PXIe-5665 modules. Note This module configuration frequency-locks to the PXIe-5653 100 MHz onboard Reference Clock by daisy chaining the 100 MHz Reference Clock to slave digitizer modules.
- Page 5 (not included) or torque screwdriver and SMA driver bit. Tighten only until the wrench clicks. 4 | ni.com | PXIe-5665 14 GHz Vector Signal Analyzer MIMO Platform Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 6 Hand-tighten all SMA cable ends on the SMA connectors after the cable center pins are correctly aligned and connected. The cable connectors should tighten without much PXIe-5665 14 GHz Vector Signal Analyzer MIMO Platform | © National Instruments | 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 7 In the Associated Devices section, select the appropriate module from each system component drop-down listbox. For the master PXIe-5665, you must associate the PXIe-5622 IF digitizer module and the PXIe-5653 LO source module. Select the slave PXIe-5605 module that is identified as not configured in the configuration tree.
-
Page 8: Where Do I Go From Here
NI Application Engineers. PXIe-5665 14 GHz Vector Signal Analyzer MIMO Platform | © National Instruments | 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 9 NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the file on your media, or the National Instruments Patent Notice at . You can find patents.txt ni.com/patents...
- Page 10 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...