Furuno SATELLITE COMPASS SCX20 Operator's Manual page 21

1. INSTALLATION
4. Pass the NMEA 2000 antenna cable through the
mounting platform and the pipe of the antenna
base from the underside of the antenna base.
5. Pull the pipe slightly upwards then apply the supplied adhesive to the inside and
bottom face the antenna base footing.
6. Fit the antenna base to the platform so that the
mounting holes are aligned with each other.
Adjust the direction of the pipe while keeping in
mind the fixing hole is pointed towards the
ship's bow as illustrated below.
A fixing hole for the
antenna unit faces
to the ship's bow.
1-12
Pull up
the pipe.
OK
Ship's bow
Right Angle
Mounting
Inside
Hashed area:
Bottom face
Foot of antenna base
NO
Ship's bow
No fixing
hole faces
to the
ship's bow.
Antenna cable
Base
Cable hole
Adhesive
Fixing
screws
(M5)