How To Mount The Antenna Unit - Furuno SATELLITE COMPASS SCX20 Operator's Manual

1. INSTALLATION
1.3.4

How to mount the Antenna Unit

1. Set the hose clamps on the pole mount kit assembly and pass the antenna cable
for NMEA 2000 through the pipe of the mast mounting kit from the underside.
Note: Make sure the anchor point of the fixing support fixture faces upward.
Pole
Mount Kit
Assembly
2. Connect the antenna cable for NMEA 2000 to the connector of the antenna unit.
Secure the antenna unit with the three supplied M5 screws from the underside.
After fixing screws, coat the screw heads with the supplied adhesive.
Antenna
unit
Connector
3. Set the antenna unit assembly to the mount-
ing pole so that the anchor of the fixing sup-
port fixture is on the top of the mounting pole
as shown in the figure at right.
1-6
Antenna cable
(NMEA 2000)
Anchor Anchor
point point
Fixing support
fixture
Hose Clamp
Apply adhesive.
Pass the antenna cable
through the cutout.
Bow mark
Mounting Mounting
Antenna unit
pole pole
assembly
Cutout
Anchor Anchor