Rider Maintenance; Check Tire Pressure - Craftsman 19HP BRIGGS & STRATTON WITH 42" MOWER 107.27768 Operator's Manual

Zero-turn rear engine riders with electric start, 19hp briggs & stratton with 42" mower
Table of Contents

Advertisement

Available languages

Available languages

Rider Maintenance
items
CLEAN
DEBRIS FROM RIDER AND
ENGINE COMPARTMENT
Service IntervaJ: Before each use.
CAUTION: if debris is not removed from the engine
compartment and other hot surfaces, it creates a fire
hazard.
Before starting the unit at the beginning of the
mowing session, remove any grass clippings, dirt,
leaves, or other debris from the unit. Also clean out the
engine compartment.
CLEAN
DEBRIS FROM ENGINE
COOLING
AREAS AND AIR FILTER
Service interval: Before each use.
CAUTION: if debris is not removed from the engine
compartment
and other hot surfaces,
it creates a fire
hazard.
Before starting the unit at the beginning of the
mowing session, lift the seat deck and clean any debris
from the intake screen on top of the engine (A, Figure
13), exposed engine cooling fins, and around the air filter
assembly. Also open the air filter cover (B) and remove
any debris that has accumulated in the air filter compart-
ment.
CHECKTIRE
PRESSURE
Service Interval: 25 Hours.
Tire pressure should be checked periodically, and main-
tained at the levels shown in Figure 14. Note that these
pressures may differ slightly from the "Max Inflation"
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.
Figure 13. Engine Compartment
A. intake Screen
B. Air Filter Cover
Tire
Pressure
Front
18-20 psi (1,24-1,38 bar)
Rear
10-12 psi (,69-,83 bar)
Figure 14. Tire Pressures
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents