Table of Contents
Advertisement
The appliance must be transported by two people
2.
using the carry handles on the right and left, while
securing the front of the appliance with one hand.
Place the appliance in the unit and fold the carry
3.
handles down.
Push the appliance in fully.
4.
Do not kink or trap the connection cable, or route it
over sharp edges.
Centre the appliance.
5.
There must be an air gap of at least 5 mm between
the appliance and adjacent unit fronts.
Use a spirit level to adjust the appliance so that it is
6.
perfectly level.
Screw the appliance into place.
7.
For handleless kitchens with vertical bar handle
8.
strips:
Attach a suitable filling piece
‒
any sharp edges and to guarantee a safe install-
ation.
Pre-drill aluminium profiles to establish a screw
‒
connection
.
Secure the appliance using a suitable screw
‒
25.7 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.
Installation instructions en
in order to cover
.
45
Advertisement
Table of Contents
