Table of Contents
Advertisement
en Meat thermometer
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the oven cavity too
long.
Requirements
¡ A type of heating and a temperature or setting are
set for the main oven .
¡ A cooking time is set.
¡ Operation with the meat probe has not been set.
¡ Operation with Sabbath mode has not been set.
Press the
button repeatedly until the symbol for
1.
the oven being switched on and the
highlighted.
Press the or
button.
2.
a The display shows the calculated end time.
Use the
or
button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
9 Meat thermometer
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. Once the set core temperature has been
reached in the food, the appliance stops automatically.
The meat probe can be used in the main oven .
The time-setting options for cooking time and end time,
as well as the cleaning function, cannot be used with
the meat probe and the Sabbath setting at the same
time. Example: The cooking time in the top oven can-
not be operated at the same time as the meat probe in
the main oven.
9.1 Suitable types of heating with the meat
thermometer
Only certain types of heating are suitable for use with
the meat thermometer.
Suitable heating functions include:
¡ 3D hot air
¡ Gentle hot air
¡ Pizza setting
14
Requirement: is highlighted on the display.
▶
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end at any time.
Requirement: is highlighted on the display.
▶
a After a few seconds, the appliance applies the
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
symbol are
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
1.
2.
a The time that is set appears on the display.
Tip: You can go to the basic settings → Page 20 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position .
button.
1.
2.
a The appliance applies the change after a few
¡ Hot air grilling
¡ Top/bottom heating
Note: If the meat thermometer is being used and you
select an unsuitable type of heating, a signal sounds.
9.2 Inserting the meat thermometer
Use the meat thermometer supplied or order a suitable
meat thermometer from our after-sales service.
Using the wrong meat probe could damage the insula-
tion.
▶
Use the
or
button to delay the end time.
seconds.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use the
or
button to set the time.
Press the
button.
Press the
button repeatedly until
in the display.
Use the
or
button to change the time.
seconds.
WARNING ‒ Risk of electric shock!
Only use the meat probe for this specific appliance.
button.
is highlighted
Advertisement
Table of Contents
