Fitting The Mounting Bracket To Metal Supports; Do Not Warp Or Deform The Mounting Bracket - Fronius Eco Installation Instructions Manual

Fitting the
NOTE!
mounting brack-
et to metal sup- When mounted on metal supports, the inverter must not be exposed to rainwa-
ports ter or splashing water from the rear.
Provide suitable rainwater protection or splash water protection.
The mounting bracket must be securely screwed to at least four points.
1
Do not warp or IMPORTANT! When fitting the mounting bracket to the wall, ensure that the
deform the mounting bracket does not become warped or deformed.
mounting brack-
et
13