Removing The Processor Heatsink Module From The Motherboard - Supermicro SuperStorageServer SSG-6019P-ACR12L User Manual

SuperStorageServer SSG-6019P-ACR12L User's Manual

Removing the Processor Heatsink Module from the Motherboard

Before removing the processor heatsink module (PHM), power down as described in Section
3.1.
1. Using a T30 Torx-bit screwdriver, loosen and remove the screws on the PHM from the
socket, starting with the screw marked #4, in the sequence of 4, 3, 2, 1.
2. Pull up the PHM while releasing the small snap tabs on two corners of the socket.
#4
#1
Printed Triangle on Motherboard
Removing the screws in
the sequence of 4, 3, 2, 1
#2
#3
Removing the Processor Heatsink Module
32
CPU Socket
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.