Unexpected Behaviour - Miele CS 7641 Operating And Installation Instructions

Problem solving guide

Unexpected behaviour

Problem
The power level selec-
ted is flashing.
The sensor controls
show increased sensit-
ivity or fail to react.
The wok has switched
itself off automatically.
The cooking zone is not
working in the usual
way on the power set-
ting selected.
The Booster has deac-
tivated early automatic-
ally.
44
Cause and remedy
The wok pan is not in position.
 Place the wok pan in position.
The sensitivity level of the sensor controls has
changed.
 Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the Smart-
Line element. The area surrounding the SmartLine
element must not be too dark.
 Take any pans off the SmartLine element and wipe
away any food deposits.
Ensure that there is nothing covering the entire
SmartLine element unit or sensor controls.
 Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
 If the problem persists after power has been re-
stored, please contact Miele Service.
It has been operated for too long.
 Switch the wok back on again (see "Safety fea-
tures" – "Safety switch off").
The overheating protection mechanism has been ac-
tivated.
 See "Safety features" – "Overheating protection".
The overheating protection mechanism has been ac-
tivated.
 See "Safety features".
The overheating protection mechanism has been ac-
tivated.
 See "Safety features".