Problem
will flash alternately
with , or in
the timer display.
A message not listed in
this table is appearing
in the timer display.
Cause and remedy
The fan is blocked or defective.
Make sure it has not been blocked by an object.
Remove the obstruction.
If this fault message continues to appear in the
display, contact the Customer Service Depart-
ment.
There is an electronic module fault.
Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
If the problem persists after power has been re-
stored, please contact the Customer Service De-
partment.
Problem solving guide
43