How It Works - Miele CS 7641 Operating And Installation Instructions

How it works

An induction coil is located underneath
the induction wok. The coil creates a
magnetic field that reacts directly with
the base of the pan and heats it up. The
wok recess itself is heated up indirectly
by the heat given off by the wok pan.
Induction heating only works when the
wok pan supplied is used.

Risk of burning due to hot items.
When the wok is switched on either
deliberately or by mistake, or when
there is residual heat present, there
is the risk of any metal items left on
the wok heating up.
Do not use the wok as a resting
place for anything.
After use, switch the wok off with the
 sensor control.
20
Noises
The following noises might occur in the
wok pan when the induction wok is in
operation:
Buzzing on the higher power settings.
This will decrease or cease altogether
when the power setting is reduced.
You might hear a clicking sound from
the electronic switches, especially on
lower settings.
A whirring sound, when the cooling fan
comes on. This switches on to protect
the electronics when the wok is being
used intensively. The cooling fan may
continue to run after the appliance has
been switched off.